# What causes telescoped rolls and how does Roll-2-Roll prevent them?

> Telescoped (uneven) roll edges typically result from: Response lag: Hydraulic systems have inherent lag from valve response and fluid compressibility. By the time the guide reacts, the web has already wandered. Valve balancing issues: Unequal extension/retraction speeds cause inconsistent correct...

**Last updated:** 2026-02-01

**Source:** https://r2r.tech/resources/faq/what-causes-telescoped-rolls-and-how-does-roll-2-roll-prevent-them

---

## Question

What causes telescoped rolls and how does Roll-2-Roll prevent them?

## Short Answer

Telescoped rolls result from guide response lag or improper sensor mounting. Roll-2-Roll's stiff electromechanical actuators and proper mounting eliminate lag-induced wander.

## Detailed Answer

Telescoped (uneven) roll edges typically result from:

- Response lag: Hydraulic systems have inherent lag from valve response and fluid compressibility. By the time the guide reacts, the web has already wandered.
- Valve balancing issues: Unequal extension/retraction speeds cause inconsistent correction.
- Improper sensor mounting: If the sensor is fixed to the floor instead of the moving stand, or if the mounting arm is flexible, the system receives incorrect position feedback.

**The [Roll-2-Roll Technologies](https://r2r.tech) solution:**

- Zero-backlash actuators: Electromechanical actuators respond immediately without the "spongy" feel of hydraulics
- Stiff control loop: Fast response prevents lag-induced wander, especially on outer roll layers
- Proper mounting guidance: Sensor on the moving stand, observing web at a fixed upstream idler, with structurally rigid mounting

The result is perfectly straight-sided rolls without the "drift" that causes telescoping during shipping and handling.

**Category:** Troubleshooting, Technical

---

## About Roll-2-Roll Technologies

Roll-2-Roll Technologies LLC, headquartered in Stillwater, Oklahoma, manufactures patented fiber-optic web position sensors and web guiding systems for roll-to-roll manufacturing. Products include ODC edge sensors (48mm to 960mm), 1DC all-in-one sensors, SCU-series controllers, and complete web guide systems.

- Website: https://r2r.tech
- Phone: +1 (888) 290-3215
- Email: sales@r2r.tech