Case Study - Line Guiding using a line within multiple lines
263.1 KBApplication
Tracking a printed line within other lines using Roll-2-Roll® Sensor System.
Customer
Converter of Precision Die-Cut Components in Indiana
Engineering Manager Customer
Problem/Challenge
Our customer needed three web guides urgently for a line guiding application. The solutions they had found were very expensive and did not provide a solution to their problem. They had been manually guiding an expensive specialty material, with a high cost of downtime and wasted materials.. The material had to be guided based on a line that was within other lines. We were contacted by them and during the conversation we understood that there were three main issues: guide a web on a line within other lines, compact design of the web guide, and lead time.
Our Solution
We offered a compact web guide system with contrast sensing for line guiding, with integrated operator interface display and 10 inch rollers for plug and play installation and operation. After installing the first two units, the customer approached us again with an interesting request: they wanted to be able to use the web guide in both directions. Web guiding dynamics does not allow for a web guiding system to guide in both directions. We came up with a simple solution: Install the web guide on a plate that would rotate horizontally 180o to reverse the direction of guiding. This required the addition of a remote operator interface to allow access to the operator upon turning the web guide direction.
Results or Customer Satisfaction
At the end, the customer was very happy with the technology and the support provided. Their ROI improved significantly due to an extreme reduction in wasted material and downtime. Read more their testimonial.
Benefits
- Quality of production - Greater reliability than other suppliers options
- Downtime reduction - Elimination of manual guidance
- Operation cost reduction - downtime reduction through elimination of manual guidance, savings from reduction of wasted material, high cost materials
- Investment Savings - Less expensive than other alternatives
Why the customer chose us
Nobody could offer them a solution of guiding on a line that was within other lines, and the options offered were expensive and did not solve the problem
Document Text
Show document text (409 words)
CASE STUDY: Line Guiding
Application Tracking a printed line within other lines using Roll-2-Roll® Sensor System.
Customer Converter of Precision Die-Cut Components in Indiana Engineering Manager
Customer Problem/Challenge Benefits Our customer needed three web guides urgently for a ➢ Quality of production - Greater reliability than line guiding application. The solutions they had found other suppliers options were very expensive and did not provide a solution to ➢ Downtime reduction - Elimination of manual their problem. They had been manually guiding an guidance expensive specialty material, with a high cost of ➢ Operation cost reduction - downtime reduction downtime and wasted materials.. through elimination of manual guidance, savings from reduction of wasted material, high cost The material had to be guided based on a line that was materials within other lines. We were contacted by them and ➢ Investment Savings - Less expensive than other during the conversation we understood that there were alternatives three main issues: guide a web on a line within other lines, compact design of the web guide, and lead time.
Our Solution Why the customer chose us Nobody could offer them a solution of guiding on a line We offered a compact web guide system with contrast that was within other lines, and the options offered sensing for line guiding, with integrated operator were expensive and did not solve the problem interface display and 10 inch rollers for plug and play installation and operation. Products Involved After installing the first two units, the customer approached us again with an interesting request: they wanted to be able to use the web guide in both directions. Web guiding dynamics does not allow for a WPS 48-WL web guiding system to guide in both directions. We Sensor for Contrast Sensing came up with a simple solution: Install the web guide on a plate that would rotate horizontally 180 o to reverse the direction of guiding. This required the addition of a SCU5 MD remote operator interface to allow access to the Controller for operator upon turning the web guide direction. Web Guiding
Results or Customer Satisfaction At the end, the customer was very happy with the WMS 250 technology and the support provided. Their ROI Compact Web improved significantly due to an extreme reduction in Guide wasted material and downtime. Read more about their satisfaction in this testimonial.
Roll-2-Roll Technologies LLC, 1110 S Innovation Way Dr, Stillwater, Oklahoma 74074 Phone # +1-888-290-3215, Email: sales@r2r.tech Website: https://r2r.tech