• SCU5 Controller with sensor
  • Sensor and web guide controller with touchscreen operator interface
  • Sensor and web guide controller with touchscreen operator interface


  • Availability:
    3 Weeks Lead Time
The Smartest Controls Should be Easy to Operate

Roll-2-Roll® Controller SCU5 is the brain of the Roll-2-Roll® Sensors and the Roll-2-Roll® Web Guide. The controller can be used for standalone sensing/measurement applications as well as for closed-loop control applications, with an appropriate actuator.

Once the sensor(s) capture the raw images, Roll-2-Roll® Controller processes the information and sends appropriate measurement or feedback to the actuator.

The controller also processes all the operator interface interaction as well as the interaction with external controllers through the industrial Ethernet communication options. Roll-2-Roll® Controller is used with both the Web Position Sensors and Web Guiding Systems providing a variety of options.

The controller is available in a aluminum enclosure with connectors or in a DIN rail mounting option.

  • Increase productivity with no setup and calibration after product changeover
  • Save time with plug-and-play operation
  • Reduce waste with high accuracy and high precision measurement
  • Reduce downtime with increased sensor reliability
  • Save money with an inexpensive alternative to vision systems
  • Save money with a single solution for multiple sensing and guiding applictions
  • One controller for multiple applications
  • Simple icon based, language independent operator interface for world wide use
  • Simple menus for quick interaction
  • Advanced communication interface for connectivity to PLCs
  • Simple plug-and-play solution
  • Edge, contrast, line and center guiding applications
  • Web guide retrofit kits
  • Unwind and rewind guiding
  • Sensing application including edge sensing, contrast position sensing, width measurement, thread counting, etc.
Input24 VDC24 VDC24 VDC24 VDC24 VDC24 VDC
ApplicationSensingSensingSensingWeb GuidingWeb GuidingWeb Guiding
Operator InterfaceNOYES  YESYES
Voltage output± 10 V2± 10 V2± 10 V2± 10 V2± 10 V2± 10 V2
Current output0 to 20 mA30 to 20 mA30 to 20 mA30 to 20 mA30 to 20 mA30 to 20 mA3
Motor Controller   YESYESYES
Actuator Included   YESYESYES
Current Consumption< 2.5 Amps< 3 Amps< 2.5 Amps< 5 Amps< 5 Amps< 5 Amps
Controller Frequency50 - 200 Hz50 - 200 Hz50 - 200 Hz50 Hz50 Hz50 Hz
Industrial Ethernet  YES  YES
Web browser dashboard  YES  YES
Remote Control  YES  YES
Diagnostics/Fault Info  YES  YES

1 not a standard option but available upon request

2 can be programmed to be ± 10 V or 0 to 10 V or ± 5 V or 0 to 5 V based on application requirement

3 can be programmed to be 0 to 20 mA or 4 to 24 mA or 0 to 10 mA based on application requirement

4 the industrial ethernet has two options C(E) for Ethernet/IP and C(P) for PROFINET

5 can be made standalone when not connected to a remote controller (PLC) or when set by remote controller (PLC)