SCU6x

In this video, we explore the nuances of using different sized sensors for center guiding in web applications with the SCU6x Controller. Normally, it’s recommended to use two sensors with the same measuring range and resolution to avoid confusion. However, this video demonstrates how it's possible to use sensors of varying sizes and addresses the potential confusion that may arise. You'll learn about sensor configuration, including how the screen displays information when different sensors are used, and how the web position indicator operates.

In this video, we dive into the SCU6x Controller's guide point reset feature. This functionality allows operators to switch web widths seamlessly without having to physically move the sensor. Traditionally, changing web widths involved manually adjusting narrowband sensors, but the SCU6x Controller offers a digital solution. We demonstrate the process of resetting the guide point through the controller's home screen, showing how an operator can set a new reference point with just a button press. The guide point offset is also explained, providing precise control down to millimeters.

Understanding Sensor Orientation and Edge Guiding with the SCU6x Controller

In this episode, we discuss situations where using two sensors becomes essential, particularly when the sensor is not wide enough for the web being monitored. The video demonstrates configuring two sensors: sensor 2 for the left edge and sensor 1 for the right edge. When a piece of paper is presented, it is partly seen by both sensors, allowing them to determine its position. The green line indicates the center line position, while the left and right edges indicate the web's boundaries, showcasing the capabilities of the SCU6x Controller.

Understanding Web Position Monitoring with the SCU6x Controller In this episode, we showcase the functionality of the SCU6x Controller's web position monitoring system. By focusing on the left edge of the web, we demonstrate how the white region in the web position indicator represents the web, while the black region indicates the background. As the web position moves from right to left, the indicator updates accordingly. We also explore how changing the orientation to the right causes the bar to switch directions, allowing for precise monitoring of web positions.

This video demonstrates the sensor orientation button functionality on the SCU6x controller for web guiding and monitoring applications in the converting industry. Learn how this feature allows you to quickly switch between two sensors installed in opposite directions, depending on whether the web is moving forward (unwind) or backward (rewind).

Understanding the Web Position Indicator on the SCU6x Controller In this episode, we dive into the functionality of the web position indicator on the SCU6x Controller. This segment focuses on explaining how the indicator bar works to show the web's position, which changes based on the sensor connected and other parameters. Join us to learn how to effectively monitor and manage web positioning using the SCU6x Controller. 00:00 Introduction to Web Position Indicator

This video focuses on the Web Detect Indicator on the SCU6x controller interface. Learn how the Web Detect Indicator functions, what it looks like under normal operating conditions, and what to do if it's not functioning properly. The Web Detect Indicator should be green when the web is present and gray when it's not. If the indicator is blinking, it could indicate a problem with the sensor, such as improper installation or angling.

This video will discuss the firmware number on your SCU6x controller. You'll learn how to find the firmware number and how it is crucial for troubleshooting and understanding the capabilities of your controller.

Heartbeat LED Indicator in the SCU6x Controller: Your Troubleshooting Companion This video dives into the critical Heartbeat LED indicator found in the SCU6x controller.