Roll-2-Roll® Controller Product Brochure

Roll-2-Roll® Controller

The Smartest Controls Should be Easy to Operate The Roll-2-Roll Controller is the brain of the Web Position Sensors and the Web Guiding Systems. The controller can be used for standalone sensing/measurement applications as well as for closed-loop control applications, with an appropriate actuator. Once the sensor(s) capture the raw images, Roll-2-Roll Controllers process the information and send appropriate measurement or feedback to the actuator. The controller also processes all the operator interface interaction as well as the interaction with external controllers through the industrial Ethernet communication options. The controller is used with both the Web Position Sensors and Web Guiding Systems providing a variety of options as shown in the table on the following page.

GENERAL SPECIFICATIONS Operator Interface Optional color touchscreen Output (Voltage) ± 10 V or 0 to 10 V Languages Language independent Output (Current) 0 to 20 mA or 0 to 10 mA Motor Driver Microstepping or servo drive Connectivity Ethernet/IP, PROFINET, EtherCAT Motor Servo or Linear hybrid stepper Input Supply 24 V DC Controller Frequency 50 to 700 Hz Current Less than 5 amps

BENEFITS ● Increase productivity with no setup and calibration after product changeover ● Save time with plug-and-play operation ● Reduce waste with high accuracy and high precision measurement ● Reduce downtime with increased sensor reliability ● Save money with an inexpensive alternative to vision systems ● Save money with a single solution for multiple sensing and guiding applications

To order (direct from factory): Your local contact is: By phone: +1-888-290-3215 ext 01 By e-mail: sales@r2r.tech Online: https://r2r.tech/request-quotation

CONTROLLER OPTIONS Following table shows the capabilities of the different controller option

Options SCU5 D SCU5 C(x4)D SCU5 MD SCU5 MC(x4)D

Input 24 VDC 24 VDC 24 VDC 24 VDC

Application Sensing + Monitoring Sensing + Monitoring Web Guiding Web Guiding + Sensing + Monitoring

Operator Interface YES YES YES YES

Analog output YES YES NO NO

Voltage output ± 10 V 2 ± 10 V 2 NO NO

Current output 0 to 20 mA3 0 to 20 mA3 NO NO

Current Consumption < 3 Amps < 2.5 Amps < 5 Amps < 5 Amps

Controller Frequency 50 - 700 Hz 50 - 200 Hz 50 Hz 50 Hz

Industrial Ethernet YES YES

Web browser dashboard YES YES

Remote Control YES YES

Diagnostics/Fault Info YES YES

Process two sensors YES YES YES YES

Digital I/O YES1 YES1 NO NO

Standalone System YES YES5 YES YES5

1 not a standard option but available upon request 2 can be programmed to be ± 10 V or 0 to 10 V or ± 5 V or 0 to 5 V based on application requirement 3 can be programmed to be 0 to 20 mA or 4 to 24 mA or 0 to 10 mA based on application requirement 4 the industrial ethernet has two options C(E) for Ethernet/IP, C(P) for PROFINET and C(EC) for EtherCAT 5 can be made standalone when not connected to a remote controller (PLC) or when set by remote controller (PLC)

Roll-2-Roll Technologies LLC 1110 S Innovation Way Dr Stillwater, OK 74074 Phone: +1-888-290-3215 Support Email: experts@r2r.tech Sales Email: sales@r2r.tech Website: https://r2r.tech

Copyright © 2021 Roll-2-Roll Technologies LLC Content subject to change without notice