1 / 7
RLA Series
Maximum Thrust for the Heaviest Web Handling Applications.
10+ Years R&D
1000+ Installations
Setup in <5 Minutes
Key Features
Technical capabilities designed for precision and reliability.
- Reverse parallel belt-and-pulley design – belt, pulley, and rotary motor driving a ball or roller screw delivers the highest thrust in the Roll-2-Roll actuator lineup: 800–1,500 lbf
- Load capacity up to 30,000 lb – with precision linear bearings (15,000 lb with standard bearings); built for the heaviest unwind/rewind stands
- Stroke lengths from 4 to 12 inches – available in 4, 6, 8, and 12 in configurations to match specific guide frame geometry and web width requirements
- Front and rear mounting options – spherical bearing and clevis mounting at both ends accommodates misalignment under heavy loads
- Powered by MC QD 1180 or SCU6x MxD – 5.5–7 A motor current at 24/48 VDC (48 VDC preferred for maximum performance)
- Off-shelf replacement – standard pivot, rod eye, and clevis mounting options fit existing terminal guide frame designs
Key Benefits
Measurable business value and operational improvements.
- Stop settling for underpowered actuators – the RLA Series delivers 800–1,500 lbf of continuous thrust, enough to position the heaviest webs with precision
- Handle every heavy application with one actuator family – from 4-inch strokes on compact rewind stands to 12-inch strokes on wide-web shifting systems, no mixing actuator brands
- Eliminate drift under maximum load – ball and roller screw drives maintain positioning accuracy even at full capacity; no creep, no gradual misalignment
- Built for the toughest environments – IP54 protection, heavy-duty bearings, and robust construction perform in paper mills, steel processing, and heavy converting operations
Specifications
Detailed technical specifications and performance data.
| Specification | Value |
|---|---|
| Thrust Range | 800 lbf to 1,500 lbf (3,560 N to 6,670 N) |
| Load Capacity (Standard Bearings) | Up to 15,000 lb |
| Load Capacity (Precision Linear Bearings) | Up to 30,000 lb |
| Stroke Length Options | 4 in / 6 in / 8 in / 12 in (100–300 mm) |
| Maximum Speed | 0.75–2 in/sec (19–51 mm/sec) |
| Drive Voltage | 24/48 VDC (48 VDC preferred) |
| Motor Current | 5.5–7 A |
| Power Source | MC QD 1180 or SCU6x MxD |
| Motor Type | Brushless Bi-polar Stepper, 1.8° resolution |
| Actuator Type | Belt + Ball/Roller Screw |
| Mounting Options | Pivot / Rod Eye / Clevis |
| Terminal Web Guide | Yes |
| Intermediate Web Guide | Yes |
| Off-Shelf Replacement | Yes |
Documentation & Downloads
CAD files, datasheets, manuals, and technical documentation.
Product Videos
Watch demonstrations, tutorials, and application examples.
Understanding Actuators in Web Guiding Systems | Web Guiding Fundamentals
How to Set the Actuator Parameters in SCU5 Controller
Setting the Parameters of SCU5 for Servo Center Operation using a Physical or Electronic Position.
Web Guide Actuators
See It In Action
Real-world applications and use cases.
- Heavy rewind stands — positioning for rewind/unwind systems handling rolls up to 30,000 lb
- Large roll shifting — lateral movement of heavy roll stands and shifting frames
- Unwind/rewind systems — terminal web guiding at the entry and exit of high-capacity converting lines
- High-load terminal guides for paper mills, steel processing, and heavy converting operations