How to Import SCU5 EDS file Into Rockwell Automation Studio 5000

foreign Technologies and today I'm going to show you how to add an su-5 controller into a Rockwell Automation PLC this video today will be pretty much in three parts first I'm gonna show how to include the ESD file to the Rockwell Studio 5000 system first of all let me show you my setup over here I have a Rockwell Automation plc I have my SEO 5 controller over here that is connected to a sensor to download the ESD file we're gonna head to our website r2r.tech resources documentation support files and then look for the EDS file for we're gonna do wheelchair first this is the ethernet IP EDS file for SEO file right click save link as choose the folder where you want to have it save it and now we can head back to Studio 5000 and go tools ESD Hardware installation tool this is going to take a second next register on ESD file next browse to the folder where you have your USD file open next next next and next you have successfully completed that yes file okay to verify the installation went through properly we are going to try to add a a device into our io3 after installing a new HD file right click module and then I'm gonna search for r2r and device is there that means that the importing of the ESD file was done successfully I'm gonna skip this for a second sometimes we have had some customers that say that this procedure doesn't work another way to do the same thing is to go into the Rockwell yes Hardware installation tool there is a standalone application from Rockwell that provide the same functionality and in this case is at and you do follow the same steps you browse from the ESD file in my case is this open next next and you get to the same point you successfully completed the ESD grid and then you can exit the application so we provide two different kind of ethernet IP interface one is the wheelchair that we just installed the other one is the any bus so to import any bus ESD file the procedure is exactly the same I'm gonna head back to the artwork.tech slash documentation website and this time I'm gonna download look for the HMS module this is any bus I'm gonna do the same thing click save link as choose the folder when I want to save it and then I'm gonna head back to Studio 5000 again tools EDS Hardware installation tool next choose the file that I just downloaded this is the manipas I see next successfully completed the ESD wizard finish I'm gonna go back and verify that ESD file was properly installed new module this time I'm gonna search for any bus and any bus I see EP this is the device that we just installed so this installation was also successful and this is the first part and this covers all that I have for today thanks for watching and if you want to stay up to date with all of our videos please subscribe to our Channel down below and have a good day