guide point adjustment

one of our features and our sensor and controllers setups that we have is the automatic guide point adjustment which makes it easier to set up your converting line by just putting the material on your sensor and then once you have the material at the position you want you can just by pressing a button reset the guide point whatever you want so let me show you how it works in this case we have it set up for senator guiding right and as you can see as I move the material around you can see where the material position is at and you can see the center of the material with that green line but however on the top part of the screen or that bar you can see a gray bar that is our actual guide point right now but if I want to reset it to say this position right here all I have to do is just press the reset guide point button and then as soon as I hit accept it will automatically take it to that position so now I have reset my guide point for this operation now this can be used for edge Center guiding with one or two sensors or contrast guiding this is beneficial for people who have operations where they move the material quite often where in in their converting line and therefore do not want to have the hassle of just doing a precise reset of their guide point it's a very easy setup very easy operation and it will save a lot of time for you in your converting line you

Today we want to show a feature in our web guides that allows for guide point adjustment We can do a fine guide point adjustment or a gross guide point adjustment without having to physically move the sensor The adjustment can be made on the operator interface by just sliding our finger across the screen In a previous video we talked about the fine guide point adjustment and today we want to go over the gross point adjustment For that we have to go to the operator interface screen, and there is a black bar on the screen and all you have to do is slide your finger across the black bar and it will move the guide point After that you will need to hit accept and the guide point will be set Unless you hit the accept button after moving the guide point, the system will not register the change in guide point If by mistake you touch the screen and move the guide point, the guide point will return to its original setting unless you hit the accept icon This is just another of our features on our web guides available in the control unit version 2.4 which is standard in all our web guides since June 2017 Fine and gross guide point adjustment, something we believe will be very beneficial for any converting operation Visit our website at www.r2r-tech.com for more information on all these features

Hi this is Pedro Velasco with Roll-2-Roll Technologies. We're going to talk a little bit about adjusting the guide point on our sensors for the web guides In many cases people want to be able to do this adjustment without having to move the sensor, and that's what we're offering now with this feature that we're going to talk about. Today, we have what we actually have two ways of doing this guide point adjustment. Ones a gross adjustment the other is fine adjustment.

We're going to talk about the fine adjustment Which is something that some of our customers have requested us to do. In this case we can provide you a fine adjustment of a little bit over .25 millimeters per step that you're going to adjust. Now this adjustment has to be done while the web guide is on and the machine or the converted process is running at the same time. We got set up on our test machine with one of our web guides with this condition.

As you can see I'm going to put the web guide on automatic and let's start our machine. So right now on our Display you can see that the two sensors are on. We actually Installed 221mm sensors on our machine in order to do a center guide. And let's say at this point.

It's the Web Material is centered on the web guide. If I want to move it to the right four to five millimeters all I have to do is press this button. and they'll recorded this there and this set. You don't have to do anything else.

It's already set that the guide point has been displaced .25 millimeters to the right and I can keep on displacing the guide for as long as I think the material is within the sensing window. Now if I want to place it back to its original position all I have to do is hit the center button. And it's in fact there. As you can see I don't have to do anything else.

All I have to do is press those buttons and it gets back there. If I went to move the guide point to the left, I hit the other Direction. As you can see it implements a little bit over 0.25 and it's excellent now. What is that value?

Well in this case is you can be very precise moving the web as you process the material. In another condition that we have, you can do gross adjustments, but we'll talk about that in a future video. now this is only available in our latest firmware version for our web guides, version 2.4 right now [this] is available for you, and actually give you more control of the web material as you're processing it. So thank you very much and let's hope to see you again in our next video