Demos

Exploring the SCU6x Plug and Play Operation. Understanding Plug and Play with Roll-2-Roll's SCU6x Controller Join Pedro Velasco from Roll-2-Roll Technologies as he demonstrates the simplicity of their 'plug and play' SCU6x controller, ODC48 sensor, and actuator system. This video covers the setup process, including how to properly connect and power the components using industry-standard connectors. Pedro explains the function of the ODC family sensors, highlighting their ability to detect various materials without the need for calibration.

For a complete overview of web width measurement with Roll-2-Roll® Sensors and Roll-2-Roll® Controller please visit this page: https://r2r.tech/articles/web-width-measurement-and-monitoring-applications-and-technology

For more information about the SCU controller please visit: https://r2r.tech/products/roll-2-roll-controller

For a complete overview of web width measurement with Roll-2-Roll® Sensors and Roll-2-Roll® Controller please visit this page: https://r2r.tech/articles/web-width-measurement-and-monitoring-applications-and-technology

For more information about the SCU controller please visit: https://r2r.tech/products/roll-2-roll-controller

This video shows how to set the actuator parameters on the SCU5 controller. 

Since Roll-2-Roll Technologies offers several different actuators from different vendors, this allows for lot of flexibility for the end customer. 

👉🏻 More information on the actuator are here: 🔗https://r2r.tech/products/roll-2-roll-actuators For more information about the SCU5 controller please visit: https://r2r.tech/products/roll-2-roll-controller.

For a complete overview of web width measurement with Roll-2-Roll® Sensors and Roll-2-Roll® Controller please visit this page: https://r2r.tech/articles/web-width-measurement-and-monitoring-applications-and-technology

For more information about the SCU controller please visit: https://r2r.tech/products/roll-2-roll-controller

How to setup Web Width Measurement with SCU5 Controller using a Single Sensor

This video shows how to import SCU5 controller as a device into EtherCAT with the ECS file.

👉🏻 EtherCAT ECS File for SCU5 firmware Version 3.5+ using Hilscher Module:

🔗https://r2r.tech/documentation/ethercat-ecs-file-scu5-firmware-version-35-using-hilscher-module

For more information about the SCU5 controller please visit: https://r2r.tech/products/roll-2-roll-controller.

This video shows how to import SCU5 controller as a device into PROFINET ecosystem with GSDML file.

The different versions of the GDSML files based on the ethernet module are available on our website here:

👉🏻 PROFINET GSDML File for SCU5 firmware Version 3.5+ using Hilscher Module: 🔗https://r2r.tech/documentation/profinet-gsdml-file-scu5-firmware-version-35-using-hilscher-module

This video shows how to import the SCU5 add-on instructions in Rockwell Automation Studio 5000. With the add-on instructions the use can easily parse the data from the SCU5 controller and can readily get up and running with the SCU5 controller.

The different versions of the add-on instructions are available on our website here:

How to set the servo center position or the home position using the SCU5 controller.

• 1: 22 Physically installating a proximity sensor to detect the home position.
• 4:32 Changing the polarity of the servo center sensor.
• 5:39 Some common problems with servo center or proximity sensor installation.
• 7:00 Servo center position based on the electronic actuator position.
• 8:30 Setting the servo center position electronically.