Web Width Measurement

How to Access the Operator Width Screen

In this video, we guide you through the steps to access the operator width screen from the home screen. Start by pressing the tools icon, followed by the operator icon located at the top right, and then the width icon. You'll first arrive at the operator width home screen, and there's an additional setup screen available where you can perform further setup tasks.

00:00 Accessing the Operator Width Screen
00:17 Operator Width Home Screen Overview
00:21 Additional Setup Screen

Multiple Web Width Measurement is made simple by the SCU6x Controller and the application that is accessible through Ethernet communication for a continuous multiple web width measurement. This application allows converters with processes such as slitter rewinders to eliminate down time due to width verification of the multiple webs. This unique feature of the Roll-2-Roll Technologies SCu6x Controller allows for monitoring and data collection of up to 32 web widths simultaneously and constantly.

SCU6x Controller Calibration for Precision Width Monitoring

Multiple width measurement is an application that many operations in converting would like to have. Much better if the application was capable of simultaneously measuring and monitoring the widths of several webs. Join Aravind Seshadri from Roll-2-Roll Technologies as he delves into the capabilities of the SCU6X controller and ODC sensors for web width measurement. Learn about the unique advantages of one-sided sensor technology, such as ease of installation in tight spaces and high resolution, independent of field of view.

Setting the Upper and Lower limits in the Web Width Measurement application of the SCU6x Controller gives operators additional tools to monitor the quality of cuts in webs that require a specific width through the process. Furthermore, the SCU6x Controller allows this set up for multiple widths, monitoring up to 32 webs. Learn how to set upper and lower limits for width measurements on the SCU6x Controller through the operator interface.

How to Find the IP Address of Your SCU6x Controller

In this tutorial, we'll guide you through the steps to find the IP address, subnet, and gateway of your SCU 6X controller using the tool icon, power user, and communication settings. Discover the type of module you have - in this case, an ethernet IP module - and ensure you're connected to the correct network to connect to the app.

00:00 Introduction to Finding the IP Address
00:14 Understanding the IP Address Details
00:23 Module Type and Network Connection

For a complete overview of web width measurement with Roll-2-Roll® Sensors and Roll-2-Roll® Controller please visit this page: https://r2r.tech/articles/web-width-measurement-and-monitoring-applications-and-technology

For more information about the SCU controller please visit: https://r2r.tech/products/roll-2-roll-controller

For a complete overview of web width measurement with Roll-2-Roll® Sensors and Roll-2-Roll® Controller please visit this page: https://r2r.tech/articles/web-width-measurement-and-monitoring-applications-and-technology

For more information about the SCU controller please visit: https://r2r.tech/products/roll-2-roll-controller

For a complete overview of web width measurement with Roll-2-Roll® Sensors and Roll-2-Roll® Controller please visit this page: https://r2r.tech/articles/web-width-measurement-and-monitoring-applications-and-technology

For more information about the SCU controller please visit: https://r2r.tech/products/roll-2-roll-controller

Web Width Measurement with SCU5 Controller: Digital Output to Drive Stack Light